Thermally conductive silicone sheet is a kind of thermally conductive medium material made of silica gel, added with other auxiliary materials such as metal oxides. . Today I want to share with you the installation method of thermal silica gel sheet:
1. Keep the end surface of the thermally conductive silica gel sheet clean to prevent the thermally conductive silica gel sheet from sticking to dirt. The self-adhesive and sealing thermal conductivity of the dirty thermally conductive silica gel sheet will deteriorate.
2. When removing the heat-conducting silica gel sheet, the thermally-conducting silica gel sheet with a large area should be grasped from the center, and the grasping of a small-area sheet is not required, because the uneven force of the large heat-conducting silica gel sheet will cause deformation and affect Subsequent operations may even damage the silicone sheet.
3. Hold the sheet with your left hand, and tear off one side of the release protective film with your right hand. Do not tear off the protective film on both sides at the same time, reduce the number and area of direct contact with the thermally conductive silicone sheet, and keep the self-adhesive and thermal conductivity of the thermally conductive silicone sheet from being damaged.
4. Tear off one side of the protective film, facing the radiator, first align the heat-conducting silicone sheet with the radiator. When slowly lowering the thermal silicone sheet. Be careful to avoid the generation of air bubbles.
5. If air bubbles are generated during operation, you can pull up one end of the silicone sheet and repeat the above steps, or use a tool to gently wipe off the air bubbles. The force should not be too large to avoid damage to the thermal silica sheet.
6. Tear off the protective film on the other side, put it into the radiator, and tear off the last protective film with a small force to avoid pulling or pulling up the thermal silica gel sheet.
7. After fastening or using a strong viscous thermal silica gel sheet, apply a certain pressure on the radiator and store it for a period of time to ensure that the thermal silica gel sheet is fixed.
The heat dissipation effect of the thermal silica sheet is very good, but during the installation process of the thermal silica sheet, the manufacturer of the thermal pad recommends that you should be careful not to be too impetuous, which will cause bubbles and damage to the thermal silica sheet, resulting in waste. Money, but also time wasted.
